How is Bondaweb used?

Iron-on adhesive on paper carrier – paper supports the web while drawing as well as ironing. Different materials and fabrics can be fused together by ironing, very easily. Ideal for fancy appliqués and textile handicrafts in all forms and colours as well as for repairs.

Which is the adhesive side of Bondaweb?

right side
Place the adhesive side of Bondaweb® on the right side of the fabric and iron it on from the paper side. Afterwards let everything cool down well. Carefully pull off the base paper of Bondaweb®. Note, the painted side always has to be covered with baking paper if it is to be re-ironed afterwards.

Can you sew through Bondaweb?

Take the fabric that you want to cut the shape out of and turn it over so the wrong side is facing you. You can feel the Bondaweb has left a coating on the fabric. Place the Bondaweb side of your appliqué onto the material it is to be adhered to and iron it until it sticks. Stitch around the edge of the appliqué.

Is Bondaweb the same as fusible interfacing?

The fusible has one side which is a mesh of fibres and used primarily to give a single piece of fabric a little extra body and strength. The mesh side is not fusible. Bondaweb (or WondaWeb) sticks fabric together; like double sided tape on card or paper.

Can you wash Bondaweb?

Bondaweb Pack Washable in temperatures up to 60C or dry cleanable.

Is Bondaweb double sided?

Double-sided iron-on adhesive. Bondaweb is a soft adhesive web attached to transfer paper. Makes bonding two fabrics together quick & easy.

How do you use a bondaweb on fabric?

Step 2 – Your bondaweb will have a smooth side and a rough side; use the smooth side to trace your pattern pieces. (Remember to trace three small windows and two large windows) Step 3 – Cut around your shapes, roughly leaving a 1cm gap. Step 4 – Using a hot iron, now gently press your bondaweb onto the wrong side of your fabric.

Which side of the bondaweb should I use to trace my pattern?

Step 2 – Your bondaweb will have a smooth side and a rough side; use the smooth side to trace your pattern pieces. (Remember to trace three small windows and two large windows)

How do you make a border with bondaweb?

Roughly cut out the shape in the Bondaweb. Giving it a 0.5-1cm border. Take the fabric that you want to cut the shape out of and turn it over so the wrong side is facing you. Lay the Bondaweb onto it making sure that you can read your writing.

How do I draw on the bondaweb?

Draw or trace your shape onto the paper side of the Bondaweb. In the middle of your design, on the Bondaweb, write your name,the colour of the material your will be cutting it out in, your favourite colour or anything as you will need this later to make sure you have the Bondaweb the right way round.