How to thin Faskolor paint?

do not use “thinner”, use water or windex to thin Faskolor.

How do you use Faskolor paint?

FASKOLOR – Start Your Project With A Great Finish!

1. Shake bottle and/or stir well before using.
2. Make sure your hands and the surface you are painting are have been cleaned with soap and water.
3. When using an airbrush, use between 40 – 70 PSI air pressure with a medium tip.

Which paint is best for polycarbonate?

Tamiya polycarbonate paints are frequently used for painting small surfaces. These aerosols are specially designed for transparent, flexible polycarbonate bodies, such as those on RC cars. For larger surfaces, we recommend applying acrylic paint with a roller.

How do you prepare polycarbonate for painting?

In this blog, we’re bringing you seven tips for painting clear plastic.

1. The basics of painting polycarbonate sheets.
2. # 1. Avoid solvents.
3. # 2. Degrease the polycarbonate sheet.
4. # 3. Sand the polycarbonate.
5. # 4. Use the right primer.
6. # 6. Use acrylic paint.
7. # 7. Allow the paint to dry.
8. Customized polycarbonate sheet.

Can I use polycarbonate paint on plastic?

ByBrittney. Model cars and other hobbies commonly use polycarbonate plastic. Painting it presents the same problem as painting most plastic: the surface is so smooth that paint cannot adhere to it.

Can I paint over polycarbonate?

Use acrylic paint. Various types of paint are especially suitable for polycarbonate. Tamiya polycarbonate paints are frequently used for painting small surfaces. These aerosols are specially designed for transparent, flexible polycarbonate bodies, such as those on RC cars.

Can I use rustoleum on polycarbonate?

Rust-Oleum has more than 20 products available to be used on plastics, including several types of primer and clear coats for a glossy finish. Rust-Oleum also does not explicitly state that these products will work on polycarbonate, so be sure to do a test patch to be sure that the project can be completed.

What do you use to thin createx airbrush paint?

Mixing & Diluting Createx Airbrush Colors Createx Airbrush Colors may be used out-of-the-bottle or, or thinned with 4011 Reducer. Airbrush: Thin colors 10% – 25% per volume with 4011 Reducer. Thin in small increments until colors flow and atomize into fine droplets.