What does the 3rd number represent on a 6010 electrode?
The third digit represents the welding position(s) for which the electrode can be used. For example, 1 means the electrode can be used in all positions and 2 means it can be used on flat and horizontal fillet welds only.
What is 308L welding rod used for?
308/308L
| Name | 308/308L |
|---|---|
| Brand | HOBART® |
| Category | |
| Description | Used to weld Types 201, 302, 304 and 308 stainless steels. Can also be used for joining some dissimilar 300 series steels. Has a low carbon content to help prevent intergranular corrosion. |
| Applications | Single and multiple pass, DCEP |
What size is a 6010 welding rod?
E 6010 Mild Steel Welding Electrode, Size: 2.5 Mm
| Size | 2.5 mm |
|---|---|
| Length | 350 mm |
| Material | Mild Steel |
| Tensile Strength | 60000 Psi |
| Rod In One Packet | 135 |
What are F numbers in welding?
The F number grouping of filler metals refers to their similarity on their usability characteristics. The usability determines the ability of a welder to deposit a sound weld metal with a certain filler metal.
What is unique about 6010 electrode?
E 6010 is used with DC current, the advantages of the E 6010 electrode that it produces deep penetration welding and can be used on painted, galvanized, and unclean surfaces.
What amp do I need for 6010?
75 to 125 amps
The correct current, or amperage, setting primarily depends on the diameter and type of electrode selected. For example, a 1/8-inch 6010 rod runs well from 75 to 125 amps, while a 5/32-inch 7018 rod welds at currents up to 220 amps. The side of the electrode box usually indicates operating ranges.
What is 6018 welding rod?
Get Latest Price. Basic coated, hydrogen controlled iron powder electrode with 115% metal recovery and excellent welding performance and radiographic quality.
What is P number in piping?
Base Metals: The P Number This number is used to group similar Base Metals, allowing qualification of an entire selection versus qualification of just one. These base metals are grouped by material and assigned P Numbers based on what material they are.
What is P number in welding?
A P-Number is an alphanumeric designation assigned to a group of materials. These materials are grouped based on their similar weldability and mechanical characteristics. P-Numbers are assigned to base metals to reduce the number of welding and brazing procedure qualifications required to perform work.
What is aluminium 6010 alloy?
Aluminium / aluminum 6010 alloy is a wrought alloy type. The following datasheet will provide more details about aluminium / aluminum 6010 alloy. The following table shows the chemical composition of the aluminium / aluminum 6010 alloy.
What does 6010 mean in strength?
The “60” in 6010 means 60,000 pounds’ tensile strength (the ability to resist being pulled apart) per square inch. The “1” means it can be run in any position—flat, horizontal, vertical, or overhead. The last number, 0 or 1, is some kind of technical jargon that I have never used in my 25 years as a journeyman or instructor.
What is the difference between 6011 and 6010 cutters?
Cutting with these electrodes produces big-time sparks and large globs of molten metal. 6011 runs on AC and direct current electrode positive (DCEP), while 6010 runs only on DCEP. This gives 6011 an advantage if you have an AC-only machine.
What is the difference between 6011 and 6010 slag?
This gives 6011 an advantage if you have an AC-only machine. I have found, and think most welders will agree, that 6010 runs more smoothly. The slag chips off better than 6011, and this is one reason it is used more often than 6011 in root passes on pipes.