What is the purpose of a newel post?
newel, also called Newel-post, upright post rising at the foot of a stairway, at its landings, or at its top. These posts usually serve as anchors for handrails. Often the stringboards, which cover and connect the ends of the steps, are framed into the newels.
What is a newel base?
A newel base is a square timber detailed with a chamfered top which is pre-drilled to accept a 50mm spigot on the bottom of a newel turning.
What is the difference between a baluster and a newel?
is that baluster is (architecture) a short column used in a group to support a rail, as commonly found on the side of a stairway; a banister while newel is (architecture) a sturdy pillar at the top or bottom of a flight of stairs, supporting the handrail.
What is the molding on the side of stairs called?
Skirtboard. A trimboard running with the rake, pitch or incline of the stair against the wall on the closed side of the staircase. While usually nonstructural, skirtboard protects the drywall surface and adds to the décor of the staircase.
What is a full newel post?
A ‘Full’ newel post is made up of a ‘Pin’ newel post and a ‘Basepost’ that has been made together in one piece. The top square of each newel post has an optional length of 160mm or 220mm. The 220mm option is only required where more than one handrail is to be attached to the Newel post.
How are newel posts secured?
One is to use construction adhesive combined with screwing it to the floor. Pre-drill holes for the screws into the base of the newel, then secure it in place. Hide the screw holes with some decorative molding. Another way is to mount threaded inserts in the surface where you will mount the newel.
What is the difference between a picket and a spindle?
Balusters usually rest on a footing; this could be a step, floor or deck, whereas, spindles are supported by a horizontal rail at the bottom that is attached to the posts. Some people also call them pickets, but this is a very loose term because pickets are usually wooden stakes that are driven into the ground.
What is a boxed newel?
Box newel posts are manufactured using 3/4″ thick solid hardwood for all four sides. These posts are constructed with lock miter joints at the corners. The flat panel and raised panel versions are made using true stile & rail construction, not just a routed out pocket. Our posts are a piece of furniture.
What is the top of a newel post called?
Newel cap
Newel cap – This is the name for the decorative top section of a newel post. They help provide an attractive finish and can be very simple, such as a square, acorn or ball, or hand carved and highly intricate.
What is the post at the end of the stairs called?
newel post
A newel post is the heavy, vertical post at the end or turn of a handrail.
What is a newel post?
Here we illustrate options for newel post installations at stairs, ramps, guards and railings. Definition of newel post: a central or end support post found at the top or bottom of a stairway or access ramp, used to support the handrail and guardrail along those walkways.
What do you use to support a newel post on concrete?
Similar products use a ring-bolt in place of the nut and washer shown here. When attaching a newel post at concrete stairs, for newel posts that can not be independently supported in the slab or into the ground or integrated with a stair stringer, I prefer
How do you anchor a newel post to the ground?
Carrying an intermediate post to a footing in the ground will add stiffness and support to the stairs but the newel posts at the stair bottom may be either securely bolted to the stringer or they may need to be anchored to piers.
Can a newel post be used at a stair landing?
Handrails within dwelling units are permitted to be interrupted by a newel post at a stair landing. IRC International Residential Code R311.7.7.2 Continuity. Handrails for stairways shall be continuous for the full length of the flight, from a point directly above the top riser of the flight to a point directly above lowest riser of the flight.