Mixed

How do I setup my Smart RG router?

How do I setup my Smart RG router?

Open a web browser and type in http://192.168.1.1/ in the address bar and press Enter. Click on Manage gateway (advanced) • If it prompts you for a username and password, enter admin (all lowercase) for both. confirmation email. You have successfully completed configuring you SmartRG 505N Modem for VDSL connection!

How do I reset my Smart RG sr505n?

How to reset a router to factory defaults

  1. Step 1: Find the reset button. There should be a tiny reset button.
  2. Step 2: Push the reset button. While the router is on, push and hold the reset button.
  3. Step 3: Hold the reset button.
  4. Step 4: Reboot the router.
  5. Step 5: Log in to the router.

How do I log into my Smart RG router?

Type 192.168. 1.1 (the most common IP for SmartRG routers) in the address bar of your web browser to access the router’s web-based user interface. The default username for your SmartRG router is admin. The default password is admin.

How do you use a smart RG router?

SmartRG 808AC

  1. When prompted to login with a username and password, use the username and password located on the bottom of the modem.
  2. Click Wireless.
  3. Click Radio.
  4. Set the Wireless Interface drop down menu to 2.4 Ghz.
  5. Click Primary Network.
  6. Enter your desired wireless network name into the Network Name (SSID) field.

How do I put my Smart RG modem in bridge mode?

2.3. Bridge mode

  1. Log into the modem’s interface at 192.168.
  2. Click “Advanced Setup”
  3. Click “WAN Service”
  4. Check the box marked “Remove” for all existing WAN service types listed.
  5. Click “Remove”
  6. Click “Add”
  7. Select the appropriate service type, either ATM or PTM, and click “Next”

How do I put my SmartRG modem in bridge mode?

How do I bridge my Smart RG modem?

If you would like to bridge the modem yourself, here are the following instructions:

  1. Log into the modem’s interface at 192.168.
  2. Click “Advanced Setup”
  3. Click “WAN Service”
  4. Check the box marked “Remove” for all existing WAN service types listed.
  5. Click “Remove”
  6. Click “Add”

How do I Reboot my SmartRG brand Home Gateway?

1.Intheleftnavigationbar,selectManagement>Reboot.Thefollowingpageappears. 2.ClickReboot.Yourgatewayisrebootedandyoumustloginagainifyouwanttomakefurtherchanges. SMARTRGINC.PROPRIETARYANDCONFIDENTIAL.ALLRIGHTSRESERVED.COPYRIGHT©2016146 APPENDIXA:ADVANCEDFEATURES ThisappendixoutlinestheadvancedfeaturesofSmartRGbrandhomegatewayproducts.

Does SmartRG support tr-069-based remotemanagement?

SmartRGgatewayssupportTR-069-basedstandardsforremotemanagement.TheTR-069clientpageispresetwithdefaultconnection parametersandgenerallyonlyneedstobeenabled,pointedtotheACSURL,andanyrequiredACScredentialsentered. SmartRGproductscanaccommodateseveralACSproducts,including:

Is specspecifyclassqueue available for sr515ac?

SpecifyClassQueue (NotapplicableforSR515acmodels)Selectfromtheavailablequeues. Note:Makesuretoselectaqueuethatisconfiguredfortheinterfacethatyou selected.Ifyouselectaqueuethatisnotconfiguredfortheselectedinterface,any packetsclassifiedintothatqueueareprocessedbythedefaultqueuefortheinter- face.

What is the default noshapingrate and burstsize for sr515?

ShapingRate(Kbps) (NotapplicableforSR515acmodels)Enterthedatarateforpacketsonthespecified Interface.Optionsare:1-1,000,000Kbps.Thedefaultis-1(noshaping). BurstSize(bytes) (NotapplicableforSR515acmodels)Entertheburstsizetobeappliedtopacketsinthe definedqueue.Optionsare1600bytesorgreater.