How much power can a GM NV4500 handle?
Registered. The NV4500 will not hold up to steady towing even if you limit it’s input to less than 300HP. If you limit application of power to everything but 4th it should hold up pretty well. Every other gear is on the countershaft, and the countershaft is the weak link of the transmission.
What is the difference between a Chevy NV4500 and a Dodge NV4500?
GM NV4500 has 1 1/8th input shaft where Dodge is 1 1/4″ input, and if memory serves me correctly the internals are different as well. Visit BowtiedCTD’s homepage! Current production Dodge NV4500 and GM NV4500 share the same gear ratios. Early GM units (93-94) were built with a lower first gear ratio of 6.34 to 1.0.
What is the gear ratio on a NV4500?
Gearing: The NV4500 has an initially attractive overdrive gear, but with a low gear of only 6.34:1 (early units) and a gear span of 7.71 and 5.61:1 (later and most common units) and a gear span of 6.96, its position against the heavy-duty four speeds (SM465, T18, SM420 or NP435) is not a lot better.
How much HP can NV4500 hold?
Rated for 550 to 750 hp and up to 1,400 lb-ft of torque, the Street Dual Disc Clutch kit has all the holding power this particular truck would ever need, with ample grip in reserve for any future power-adders, larger tires, and for towing every ounce of the truck’s rated capacity.
How many quarts does a NV4500 take?
New Venture NV4500 Transmission Specs
| Transmission: | New Venture NV4500 |
|---|---|
| Case Length: | 12.375″ |
| Max Input Torque: | 460 lb-ft |
| Weight: | ~ 195 lbs dry |
| Oil Capacity: | ~ 4 quarts (1 gallon), fill to bottom of fill plug hole |
What is the input shaft on a NV4500 gas 4WD?
Dodge Gas 4wd NV4500s initially were introduced with a 23 spline rear output shaft and a 6-1/4 tailhousing. The input shaft is 7-1/2″, 1-1/8″ 10 spline with a .75″ pilot tip (we have seen very rare 1″ 19 spline inputs in 1993 trucks). The front retainer is 5.6″ with a 1.43″ snout.
What is the front bearing retainer Index on a NV4500?
The front bearing retainer index is 5.6″ with a snout diameter of 1.75″. Dodge Gas 4wd NV4500s initially were introduced with a 23 spline rear output shaft and a 6-1/4 tailhousing. The input shaft is 7-1/2″, 1-1/8″ 10 spline with a .75″ pilot tip (we have seen very rare 1″ 19 spline inputs in 1993 trucks).
What’s the GM NV4500 4WD transmission bolt pattern?
As a general rule, a GM NV4500 4WD transmission will always have a 32 spline rear output shaft with an 8-1/8″ rear tailhousing. The input shaft is 6-5/8″ 1-1/8″ 10 spline with a.590″ pilot tip. We have also seen a rare 1995 GM NV4500 which can be classified as a hybrid. The transmission has the lower 6.34 with the newer bolt pattern.
Does nvnv4500 fully splined mainshaft 4×4 have gears?
NV4500 Fully Splined Mainshaft 4×4 Does NOT include any gears or nuts. It comes with the split washers for the updated main shaft only. .. The South Bend Hydraulic Assembly HYD-HD is a direct replacement for your 1994-1997 Dodge 5.9L Cummins. This kit comes pre-filled and pre-bled.