What is 6060 aluminium alloy used for?

6060 6060 alloy is one of the most common alloys of the 6000 series. It is a heat treatable alloy with very good corrosion resistance and weldability. It is commonly used in window and door frames in residential and commercial applications.

Is 6061 wrought or cast?

Goahead is right, 6061 standard is specific to wrought material. Casting alloys (and there are alloys that are functionally equivalent to 6061).

Is 6061 good for casting?

RE: Can 6061 aluminum be cast? Of course 6061 can be cast – it is cast into an ingot shape prior to wrought processing. Now, if you want to make a near-net shape part using a standard casting process like sand casting, gravity die casting, etc., then you will encounter problems.

What is 6061 aluminum?

6061 aluminum is a 6000-series aluminum alloy: there is significant alloying with both magnesium and silicon, and the alloy is formulated for primary forming into wrought products. 6061 is the Aluminum Association (AA) designation for this material. In European standards, it will be given as EN AW-6061.

What is aw-6061?

The alloy EN AW-6061 is a high strength alloy for highly loaded structural applications. Typical applications are scaffolding elements, rail coach parts, containers, machine building and aerospace parts. This alloy is equivalent to EN AW- 6082, however due to its higher Cu-content, the corrosion resistance is somewhat lower.

What is the difference between EN AW-6082 and en Aw 6061?

The alloy EN AW-6061is a high strength alloy for highly loaded structural applications. Typical applications are scaffolding elements, rail coach parts, containers, machine building and aerospace parts. This alloy is equivalent to EN AW-6082, however due to its higher Cu-content, the corrosion resistance is somewhat lower.

What is 6060 alloy used for?

Aluminium alloy 6060 is a medium strength heat treatable alloy with a strength slightly lower than 6005A. It has very good corrosion resistance, very good weldability and good cold formability. It is commonly used for complex cross sections and has very good anodizing response.