What type of crimp are the 97 53 18 knipex Twistor 16 self adjusting crimping pliers for?
Wire ferrules
Square crimp profile, high capacity range from 0.14 to 16 mm². Wire ferrules can be crimped from almost any working position. Crimping pliers adjust automatically to different cross-sections.
What type of crimp profile does the twistor16 97 53 18 make?
Square
For crimping wire end sleeves according to DIN 46228 parts 1 + 4. Square crimp profile, high capacity range of 0.14 to 16 mm². 360° rotatable crimping die….EAN: 4003773082729.
| Code 97 53 18 | |
|---|---|
| Crimping Profile | Square |
| Capacity mm² | 0.14 – 16 mm² |
| Application | Wire end sleeves |
| Number Of Crimping Positions | 1 |
Where should the crimp be located for optimum crimp effectiveness?
For optimum crimp effectiveness, the crimp must be within the area shown above B. Effective crimp length should be defined as that portion of the wire barrel, excluding the rear chamfer, fully formed by the crimping tool C. Instructions for adjusting, repairing, and inspecting tools are packaged with the tools
Where should the crimp be located on the wire?
Crimp location: A. For optimum crimp effectiveness, the crimp must be within the area shown above B. Effective crimp length should be defined as that portion of the wire barrel, excluding the rear chamfer, fully formed by the crimping tool C. Instructions for adjusting, repairing, and inspecting tools are packaged with the tools
How do you use a wire crimping tool?
Hold terminal and close tool handles partway until crimping dies hold terminal in place 5. Insert stripped wire through slot in locator into terminal wire barrel, until insulation buts against locator 6. Hold wire in place and close handles until ratchet releases LOCATING AND CRIMPING
What are the basic Crimp techniques?
The following is a guide to basic crimp techniques – designed to ensure quality terminations and to prevent poor connections and/or tooling. The components of a good connection include: A. Correct tooling for terminal and wire B. Correct terminals for application C. Properly prepared wire D.