Where is the reset button on a Mitsubishi DLP TV?
How to Reset a Mitsubishi TV
- Open the front panel by pushing on it.
- Use a pointed object, such as the sharpened end of a pencil or the tip of a paper clip, to push the “System Reset” button.
- Wait about one minute, or until the green LED light on the front panel display stops flashing.
How do I know if my TV bulb is out?
Signs and Symptoms If your lamp goes out suddenly, you might hear a popping noise, after which the screen goes dark. You’ll still be able to hear your TV but you won’t see the picture. Some TV manufacturers install a warning to change the lamp when it starts to burn out so you’re not left without your TV.
What is a DLP bulb?
A DLP (digital light processing) lamp is the main source of light in a rear screen projection television set. DLP lamps do tend to age after a few years, with the length of time depending on the brand used and how many hours you have your TV set on.
How do I replace the lamp on my Philips TV?
Turn off TV power and unplug the TV. Allow the lamp to cool for at least one hour before proceed- ing. 2. After the lamp has cooled, remove the cover of the lamp compartment, located on the back of the TV. Refer to figures 1 and 2. Use a #2 (medium) Phillips screwdriver to loosen the screws securing the cover.
How do I obtain a replacement lamp?
To obtain a replacement lamp, order the lamp directly from the MEVSA Parts Department at (800) 553-7278. Warranty 41 For assistance call 1(800) 332-2119 2. THIS LIMITED WARRANTY DOES NOT COVER: a. Up to .01% pixel outages (small dot picture elements that are dark or incorrectly illuminated). b.
How do I clean the screen on my Mitsubishi TV?
• Do not allow liquid to drip down the screen, as some liquid may enter the TV through the gap between the screen and screen frame. • You may purchase Mitsubishi Screen Cleaner, part number CLEANER-VSS, by calling 1 (800) 553-7278. General Cleaning Precautions
How do I contact Mitsubishi TV support?
• For questions: – Call Consumer Relations at 1 (800) 332-2119. – E-mail: [email protected] -Website: www.mitsubishi-tv.com Reset Name When to Use How to Use Resulting Action Control-Panel Lock Release