How do I connect my Anker keyboard?

1. Push the power switch to the ON position to turn on the keyboard.
2. Stimultaneously press FN+Z to enter pairing mode.
3. Activate your device’s Bluetooth function and search for the keyboard.
4. Once they are successfully paired, the Bluetooth indicator will turn off.

Does the Anker ultra slim Bluetooth keyboard work with IPAD?

Comfortable & Intuitive: Low-profile, matte finish keys enhance your typing experience. Automatically connects to your last-connected device. Broad Compatibility: Use with all four major operating systems (iOS, Android, Mac OS and Windows).

Why is my Anker keyboard not connecting?

Why Is My Anker Bluetooth Keyboard Not Working? You can fix it by going to Settings->Bluetooth and tapping the (i) next to “Anker”, then tapping “Forget this Device.” Switch the keyboard off, then turn it back on. All should now be fixed.

How do I pair my Anker A7726 keyboard?

As for the pair issue, could you please try the following steps:

1. Go to “Settings”,
2. Choose to click on “Devices and printers”.
3. Click on “Add a device” and it will search all devices.
4. Click on “Anker A7726”(Or A7721) and a window will pop up to prompt you to enter a passcode.

How do I connect my Anker Bluetooth keyboard to my laptop?

But I did have luck with this:

1. Turn on your keyboard’s pairing mode using Fn+z.
2. Open Control Panel.
3. Select Devices & Printers.
4. Select “Add a Device”
5. Select Bluetooth.
6. Select the Anker keyboard.
7. In the “Enter the PIN for Anker 7726” text box, enter at least one digit and hit Connect.

How do I sync my Anker keyboard to my iPad?

To enter pairing mode, hold down the Fn and Bluetooth keys at the same time. After 2 seconds, the indicator light will flash and start to turn on. Find the keyboard by activating the Bluetooth function on your device.

How do I reset my Anker keyboard?

To reset to factory setting: Press and hold the N, E, and W keys while turning on the keyboard. Light flashes and the keyboard enters Bluetooth discovery mode.

How do I find the pin for my Anker keyboard?

Anker A7726 PIN

1. Please try to input 6 zeros and press “Enter” key on your connected/original keyboard.
2. Input the same code and press “Enter” on Anker Bluetooth keyboard.

How do I reset my Anker Bluetooth keyboard?

How to connect Anker Bluetooth keyboard to PC?

Insert fresh batteries and/or charge your keyboard. If your keyboard has a battery slot,insert the batteries as indicated in the keyboard’s packaging.

Plug in the keyboard’s receiver. If your wireless keyboard came with a small USB receiver/dongle,plug it into an available USB port.

Install drivers if prompted to do so.

How to reset Anker keyboard?

Make Sure The Mouse Is On. Refer to Mouse Does Not Turn On to check if the mouse is on or not.

Restart The Computer. Most problems can be solved by restarting your computer.

Clean the Scroll Wheel. Sometimes the scroll wheel could be dirty!

Scroll Wheel Might be Broken.

How to put Anker keyboard into pairing mode?

open Control Panel (bottom left – Search Windows,type Control Panel)

select Devices&Printers

select Add a device

then a box appears where you can type an entry code (which we don’t have). Under this box is a line of text.

you’re now given an 8 digit code

type this code on your Anker keyboard.

connected!

How to connect Anker a7726?

Go to “Control Panel” (Click Start and start typing “Control Panel” with the virtual keyboard)

Go to “Devices and Printers”

Go to “Add Device”

Make sure the Bluetooth Keyboard is OFF (after trying with it on before and failing)

Select the Keyboard if it’s still in the listings