How much is a tailgate light?

The cost of an aftermarket tailgate light bar may range between $50 and $180 for parts alone.

What does it mean when your brake light comes on?

When your brake light comes on, your car is letting you know that either your vehicle is low on brake fluid, the emergency brake is activated, there’s trouble within the ABS unit, or there’s a problem with the sensors. Most vehicles have a sensor that confirms whether the parking brake is engaged or not.

Can you use a light bar as a reverse light?

WHAT ABOUT REVERSE LIGHTS? With so many cheap light bars on the market lately it’s not surprising to see they’re starting to turn up on roof racks functioning as massively powerful reverse lights. But it’s unarguably illegal.

How do I install the tailgate light bar?

The light bar mounts in the recessed area between the bottom of the tailgate and the bumper shelf and plugs into a standard four-pin trailer receptacle or can be hard wired into the truck taillights. 1.Please read all instructions before installing the light bar. 2. The following procedure describes a generic (typical) installation. 3.

How do I attach the light bar to the tape?

We advise using the plastic or wood handle of any tool and press firmly along the light bar at tape adhesive locations. DO NOT PRESS ON THE CLEAR LED LIGHT STRIP.

Where is the Red Wire on the Xtreme light bar?

Most late model vehicles have ample space under the dashboard on the driver side where you can access these two ignition/accessory wires. The RED wire MUST be connected to one of these two wires otherwise the Xtreme light bar will not function properly.

How do you wire a trailer light to a car?

If your vehicle does not have a trailer light plug, you can clip off the light bar four-pin connector and hard wire the leads directly to the vehicle taillights using the information in Figure 4. The park light lead is the one directly next to the ground.