How do I change my Bionaire filter?

To clean the filter:

Turn off and unplug the air cleaner.
Remove the air inlet grill by pulling on the tab.
Remove and examine the foam pre-filter.
If it has collected dust or lint, remove and wash it in warm, soapy water.
Check the condition of the a permanent filters and remove if dirty.
Clean the a permanent filter.

How do you fill a Bionaire humidifier?

Bring the tank to the sink, turn upside down and twist off the tank cap by turning counter clockwise. Fill tank with cool, fresh tap water. DO NOT fill with warm water as this may cause leaking. Replace the cap on tank FIRMLY.

Why is my Bionaire humidifier not working?

There may be a few possible causes for the mist not to work. It may be the unit is not on a level surface, there are mineral deposits on nebulizer or sensor, or the water tank had been washed with a detergent.

Can you use tap water with a humidifier?

Typically, your household tap water is going to be perfectly fine for your humidifier. During this process, the minerals from your tap water are also broken down and dispersed into your air, which can leave behind white dust once the water evaporates.

How do I clean the filter on my Bionaire humidifier?

Recommended cleaning products are undiluted vinegar or a mild household cleanser. Vinegar is the weakest and cleanser is the strongest. Always turn the unit off and unplug before cleaning. Remove the water tank and wick filter, then empty any excess water from the tank and base.

How do you fill a Bionaire ultrasonic humidifier?