Why is my printer printing more than one copy?

Check the settings at the printer level, check if there is an option for copies, that happened to us long time ago and what happened was that the client by mistake was changing some setting on the printer itself and set the numbers of copy to 3.

How do I stop my HP printer from printing multiple copies?

1. Open Control Panel from Start Menu.
2. Choose Devices and Printers.
3. Right click the printer and choose Printer Properties.
4. Click Device Settings tab.
5. Scroll down to Mopier Mode and change to Disabled.

How do I reset my HP 2300 printer?

HP LaserJet 2300 Turn off the printer. Turn it on and hold the green checkmark button until all three lights are on. When the lights are on, stop pressing the checkmark. When Select Language appears, press the Up Arrow button to select Cold Reset and press the green checkmark button again.

How do I turn off mopier mode in Windows 10?

Reputable

1. Go to the Start Menu and click on Devices and Printers.
2. Right-click on the HP Printer (i.e. HP LaserJet P2035 printer) and then select Printer Properties.
3. Click on the Device Settings tab at the top of the next window.
4. Scroll to the bottom and look for Mopier Mode.
5. Change it from Enabled to Disabled.

How do I make my printer print 2 copies by default?

Set your computer to default “double-side” with the following seven steps or watch the helpful video.

1. Start menu > “Control Panel”
2. Choose “Printers and Faxes”
3. Right click your primary printer.
4. Choose “Printing Preferences”
5. Choose “Finishing” tab.
6. Check “Print on both sides”
7. Click “Apply” to set as the default.

Why does my printer only print one copy at a time?

Disable Mopier mode – this mode is used when the printer has an EIO hard disk installed. If the printer doesn’t have one, it will only print one copy. Open the (Devices and) Printers Control Panel. Right-click on the printer, and choose (Printer) Properties.

How do I stop multiple prints?

1. Click the Start button.
2. Click Control Panel.
3. Click Printer.
4. Click your printer’s icon, and then click See What’s Printing on the command bar (located at the top of the page).
5. On the menu bar click Printer.
6. Click Cancel All Documents, and then click Yes to confirm.

How do you stop printing multiple pages?

In the Page Setup dialog box, make sure that “Multiple pages” drop down is set to “Normal” (not “Two pages per sheet”). Also look at the print options at File > Print.

How do I make my printer print more than one copy at a time?

Contact your computer manufacturer or System Admin for support with this feature.

1. Open the Printers folder.
2. Access the driver properties:
3. Click on the Advanced tab.
4. Select Print Directly To The Printer.
5. Click Apply → OK.
6. Attempt to print multiple copies of a small (1 or 2 page) document.

What is mopier mode HP LaserJet?

Mopier refers to a type of mode that computer printers may be switched on to that only allows them to print one copy of a document at a time. This mode must be disabled if someone wants to print multiple copies of a document.

How to print directly to HP LaserJet 2300 printer?

Right-click the HP LaserJet 2300 printer driver and select Properties. Click Details and then Port Settings. Click to clear the check mark from the Check Port State before Printing box. Click OK. Click Spool Setting and then click Print Directly to Printer.

Can you do manual duplex on a 2300n printer?

Manual duplexing You can perform manual duplexing for the HP LaserJet 2300L, HP LaserJet 2300, and HP LaserJet 2300n printers. The printer prints the first side of each page, waits for you to insert the paper into the printer, and then prints the second side of each page.

How many pages per minute does a 2300l print?

HP LaserJet 2300L The HP LaserJet 2300L printer prints letter-size paper at speeds up to 20 pages per minute (ppm) or A4-size paper at up to 19 ppm. It comes with a built-in 250-sheet tray, both parallel and universal serial bus (USB) ports, and 32 megabytes (MB) of random-access memory (RAM).

Why does my HP printer only print one copy?

If the printer doesn’t have one, it will only print one copy. Open the (Devices and) Printers Control Panel. Right-click on the printer, and choose (Printer) Properties. Click the Device Settings tab. Scroll to the bottom of the list, and change “Mopier Mode” to “Disabled”, then click OK.